LED Liner High Bay T31B
LED Liner High Bay T31B High Bay Penang, Malaysia, Bukit Mertajam Supplier, Manufacturer, Distributor, Supply | EGE Technology Sdn Bhd
Download Files
LED_Liner_High_Bay_T31B.pdf (622.11 KB)
The T31B is a modern and energy efficient fixture designed for high rack warehouses and storage areas with narrow aisles. Several beam angle choices allow you to find a fitting solution for any situation. With a narrow beam angle like 30°or 30°x70°. You can install the fixture in up to 35-40m height, while a wider 40°x130° lens would give you an optimal light distribution for long and narrow aisles.
With a power range from 100W up to 600W and an efficiency of around 130lm/w, this fixture can maximize your governmental rebates and minimize your customer’s power consumption. The robust and durable aluminum housing assures excellent heat distribution. Thanks to an ingress rating  of IP65 it is suitable for indoor and outdoor use under all conditions. Suspended or surface mounted it will provide a perfectly homogenous light distribution and therefore more safety in warehouse.

  • Widely used in Warehouse, Manufacturing Plant, Mall, Department Store and etc.
Product Descriptions: 
  • High Strength aluminium alloy material, electrophoresis and powder coating with strong anti-corrosion treatment surface finishing.
  • Integrated housing design with heat sink to allow for excellent heat Dissipation.
  • Power range available from 100W to 600W.
  • Installation heights up to 30 meters.
  • Multiple beam angle for different applications with Low Glare optical PC Len cover for the best performance in the lighting distribution.
  • High Efficacy at>130 LM/W with Original Lumileds Chips, certified LM80 & TM-21 is available.
  • Ingress Protection: IP65 Weatherproof suitable for Indoor and outdoor use.
  • Quick and easy to install and with optional motion and daylight sensor.

Beam Angles
The illustration below shows the different light distributions for our beam angle options. The symmetric beam angles are ideal for wide and open areas such as production halls or storage areas with lower racks. The light gets distributed very evenly across a circular area below the fixture.
For warehouses with high racks the asymmetric beam angles are the better choice. The emitted light is precisely spread out along the aisles without wasting it on top of the racks. With currently 8 different beam angle option a fitting solution for every area of application can be easily found.
Simulation Reference
To better show you how the beam angles choice can influence the light distribution, we made a Dialux simulation to demonstrate the differences. Below you find 3 similar scenarios of a warehouse with 10m ceiling height and 8m high racks. The aisles between the racks are 4m, 3m and 2m wide. It becomes obvious that the 30x70° lens beams down the most light. For high ceilings and/or narrow aisles this is your best bet.
The 40x130° lens shows excellent results for midrange ceiling heights and long aisles. It will allow for near perfect light distribution in most warehouse types. The 60x90° lens turn out to be a very good choice for wider aisles and midrange ceiling heights.

Remark: Detail and specification are current at the time of publication but may be changed without prior notice

Electrical & Mechanical Protection Function
  • Output over - Voltage Protection
  • Ingress Protection: IP66
  • Output over - Current Protection
  • Impact Protection: IK09
  • Short Circuit Protection
  • Full set of Stainless steel screw use.
  • Over Temperature Protection
  • Full set of waterproof connector use.
  • Surge Protection: 10KV
  • Anti UV and Fire Proof Optical PC Len.

Model & Specification
  POWER RATING (W) EGE-LH100 / 120-T31B EGE-LH150/180-T68 EGE-LH200/240-T31B EGE-LH400-T31B
   Input Voltage AC100 ~ 277V
   Frequency 50 / 60 Hz
   Power Factor >0.95
   Working Temp - 30°C + 50°C
   CRI  Ra ≥ 70
   Luminous Flux (LM) 13000 / 15600 19500/23400  26000/31200 52000
   Lamp Luminous    130 ±LM/W
   Color  Temp  3000K, 4000K, 5000K, 6000K.
   LED Source  Lumileds 3030
   LED Driver Tomcarline
   IP Rating IP 65
   Beam Angle 30°/60°/90°/120°/ 30*70°/60*90°/ 40*130°/90*120°
   Lifespan  ≥ 50000 Hours
   Material Aluminum Alloy / PC  
   Certificates TUV, CB , CE, D-Mark, UL, DLC, SAA, C tick.
   Dimension (MM) 600*130*130 890*130*130 1180*130*130 1180*270*135 
   Weight 4.0 5.5 7.0 14.3

Installations Method ​ 

Remarks: Detail and specification are current at the time of publication but may be changed without prior notice 



Please leave your enquiry here, we will reply as soon as possible.

Switch To Desktop Version